| Installation for Single-phrase: |
Model: PT-01
*For Monthly Consumption from 250kWH - 1000kWH.
Plug in the POWERTUNE Electricity Saver Fimly
into a wall socket nearest to the ELCB box or distribution channel.
|
Model: PT-02
*For Monthly Consumption from 1000kWH - 2000kWH.
Plug in the POWERTUNE Electricity Saver Fimly
into a wall socket nearest to the ELCB box or distribution channel.
|
|
|
 |
 |
| Installation for 3-phrase: |
Model: PT-01
*For Monthly Consumption from 1000kWh - 3000 kWh.
- Indentify 3 wall socket nearest to the ELCB box or distribution channel
- Plug in the POWERTUNE Electricity Saver firmly into a wall socket into each phase.
|
Model: PT-02
*For Monthly Consumption from 3000kWh - 6000 kWh.
- Indentify 3 wall socket nearest to the ELCB box or distribution channel
- Plug in the POWERTUNE Electricity Saver firmly into a wall socket into each phase.
|
|
 |
Model: PT-02
*For Monthly Consumption from 6000kWh - 10,000 kWh.
- Indentify 3 wall socket nearest to the ELCB box or distribution channel
- Plug in the POWERTUNE Electricity Saver firmly into a wall socket into each phase.
|
Things to take Note:
- Do not plug into an extension cord / multiple socket
- For 3-Phase Installation, in most cases,
extra power points will be required from each phase.
- We recommend maximum of 10,000KWH usage per month.
Above 10,000KWH, Power.Tune will not be able to support.
PRECAUTION:
- Keep the product away from children.
- You are advised to unplyg the POWERTUNE Electricity Saver ONLY when the LED indicator light is totally off after 5 seconds
|
 |
|
 |
| GUIDES to proper Installations: |
| CORRECT INSTALLATION |
INCORRECT INSTALLATION |
| Power.Tune must be firmly plugged onto the wall socket |
Do not plug Power.Tune onto loose socket or not firmly plug in the Power.Tune |
 |
 |
| Install the Power.Tune onto Wall Socket |
Do not install Power.Tune on the Extention Multiple Socket |
 |
 |
| Using converter to convert into different plug head is allowed |
Do not plug in the Power.Tune onto the multiple way socket |
 |
 |
You may also Plug Power.Tune onto the timer plug and control the time to switch on/off the Power.Tune.
To achive better results, swith off the Power.Tune during low electricity consumption periods, eg: after office hour or nobody at home. |
Improper installation of Power.Tune may cause the following problems :-
- Electric shocks
- Surge protector burst
- PCB malfunction
- Power.Tune to burn-out and melted (as we are using Fire/Flame Retardant material, this will not cause fire, other brand may cause fire)
|
 |
